Teak Deck Installation System using the “Covella Method”
Save up to half your time installing a teak deck (sanding time not included). Less stress and a cleaner job. Instead of screwing down washers and using spacers, the Covella clips combine these two into one. Using the removal tool makes the job easy and fast. The Covella clips secure the boards and spaces them accurately. The clips slightly bend as you screw them tight to let you know it is secure. They are reusable many times. (You provide your own screws based on the substrate.) Once your boards are glued down next use the Covella nozzle to apply the caulk in the seams easily and eliminate air bubbles. They slip over normal caulk tubes. The process is the opposite of normal. Most people pull back on the caulk gun as they dispense the caulk in the seams often trapping air bubbles. With the Covella nozzle the rectangular tip fits precisely in the seam (slightly more narrow than the seam). It has flat flanges on it to ride on the boards. This makes it easy to maintain an even flow as you move along. Instead of pulling the gun - you push the gun. This makes the caulk shove a pile of caulk forward as you go eliminated trapped air bubbles. This process is very easy since the nozzle is riding on top of the wood as well as in the seam. And another problem we all hate is caulking around the outer edge with overhangs etc. We also sell a hooked nozzle that allows you to reach into the areas that the caulk gun normally does not allow.
1/4" Covella Clip come in bags of 80 pieces. They are re-usable. They act as a spacer and hold down clamp while the boards adhere to the substrate. As you screw them into place (using your own screws) they will slightly bend as they get tight to let you know they are secure a holding the board. They yeild a 1/4" wide seam.
1/4" Covella Clip X 80 $109.92 plus $10.92 ship & handle
3/16" Covella Clip come in bags of 80 pieces. They are re-usable. They act as a spacer and hold down clamp while the boards adhere to the substrate. As you screw them into place (using your own screws) they will slightly bend as they get tight to let you know they are secure a holding the board. They yeild a 3/16" wide seam.
3/16" Covella Clip X 80 $109.92 plus $10.92 ship & handle
This Covella Nozzle is for 1/4" seams. It fits over the cut nozzle of a normal caulking tube. I makes it easier to keep the caulk gun moving fast yet a more even application. When used as a push nozzle it eliminates almost all air bubbles. They come in packs of 5.
1/4" Covella Nozzle X 5 $23.92 plus $5.92 ship and handle
This Covella Nozzle is for 3/16" seams. It fits over the cut nozzle of a normal caulking tube. I makes it easier to keep the caulk gun moving fast yet a more even application. When used as a push nozzle it eliminates almost all air bubbles. They come in packs of 5.
3/16" Covella Nozzle X 5 $23.92 plus $5.92 ship and handle
The Covella Hook Nozzle allows you to reach those hard to get places along the outer edges. The hole is 1/8" but can be cut or drilled out larger. They come in 3 packs. Again they slide overf a standard caulk tube.
Covell Hook Nozzle X 3 $17.92 plus $5.92 ship and handle
The removal tool makes is fast and easy to remove the clips once the adhesive has cured.
Removal Tool for 1/4" Covella Clips $12.92 plus $5.92 ship and handle
Removal Tool for 3/16" Covella Clips $11.92 plus $5.92 ship and handle
Save money by buying the kit. The kit includes a small ammo can (plastic), 160 clips, one removal tool (tool mounts in the lid), 5 seam nozzles, and 1 hook nozzle. You save on product and shipping. This allows yo to keep everything in one box and makes it easy to work on a deck section.
1/4" Kit $269.92 plus $15.92 ship and handle
3/16" Kit $268.92 plus $15.92 ship and handle